Standards

Delstar Engineering Limited offer a range of standard equipment for purchase or hire which is designed to suit your needs and budget constraints.

Scissor lifts in a variety of shapes and sizes, for example, Half Ton capacity units are available as single or double legged with a travel of 2.5 metres and plan size of 2 metres x 1.7 metres reducing to 1metre.

Above:
An orchestra lift on final test.

Floor revolves can be of your chosen diameter with hydraulic or electrical drive, hire revolves are also available up to 15 metres diameter.

Above:
A hydraulically driven floor revolve.

Standard trusses are available for stretcher frames, of triangular construction with a round outer chord for wrinkle free finish and a lacing rail inside the truss for tying off. Spigotted joints are provided for easy alignment of the lightweight truss sections.

Above:
Typical truss work for
stretched cloths.

Flying Equipment/Winches

Above: Double purchase counter weight flying.

Above: LX Bar and Hoist

Above: Counter weight flying.

Above: Grid diverters for Counter Weight Flying.

Hydraulic rams can be built to a wide range of bore and rod sizes with a vast range of strokes and choices of flange mounted, pin mounted or spherical eye.

Hydraulic power units are also available for purchase or hire and are manufactured in a variety of sizes.
Popular sizes include 3 Phase units of:
7.5kW providing 46 litres per minute at up to 85 bar.
11kW providing 66 litres per minute at up to 85 bar.
18.5 kW providing 103 litres per minute at up to 95 bar.
Motor pumps can be doubled up on a common reservoir.
110 and 240 volt units along with battery powered units are also possible.

Above:
A twin pump power unit on large capacity tank.
A mobile version is also shown

800l/min Power unit

Pressure and return line filtration is utilized according to the
application and high quality standard fittings such as filler
breathers and sight glasses are always installed.
Call us with your special requirements and see
how adaptable we are!